SKU: 20185890670
Ships within 48 hours · Estimated delivery Sep 8 - Sep 13
check if you can set your servo controller to custom pulse lengths and try 0
Wire Pitch: 0
and 52 on the Mega
No-Load Current: <0
LED Status indicators to indicate the relay ON/OFF status
BME280 Digital Sensor 3.3V USB C breakout board check if you can setBME280 is a Breakout Board featuring a Sensortec ME280 Temperature, Humidity & Pressure Sensor. The board has selectable I2C address jumper (solder link GS2), I2C pull up resistors, 7 pin header 2. 54mm, and two mounting holes 3. 5mm. Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0. 1uF on both power supply pins Vdd & Vdd_IO. If
US$ 115.00
US$ 59.00